Use this ip
010.199.212.002
put this in your Custom HTTP Server
http://80.239.243.2
go to host in your opera and put www.mtnonline.com, warning do not put http. after that you can rejoice with your free browsing.
Wednesday, September 15, 2010
ETISALAT FREE DOWNLOADING CHEAT
ip- 98.131.115.166
port- 80
username/password- etisalat
APN- etisalat.com.ng
go to bookmark, set it like this http://10.71.170.30/p/nph-erp.cgi/000000a/http/ any desired choice of yours.
port- 80
username/password- etisalat
APN- etisalat.com.ng
go to bookmark, set it like this http://10.71.170.30/p/nph-erp.cgi/000000a/http/ any desired choice of yours.
LATEST ETISALAT FREE BROWSING FOR OPERA 4.2
just go and create prov from myprov.co.cc, then use this ip's
080.239.243.2,
080.239.242.129.
then go to your opera, put this in your custom socket and http custom socket server, put http://10.71.170.30. after that you can browse for free.
080.239.243.2,
080.239.242.129.
then go to your opera, put this in your custom socket and http custom socket server, put http://10.71.170.30. after that you can browse for free.
Tuesday, September 14, 2010
HOW TO CONFIGURE MOZILLA FIREFOX, OPERA, AND INTERNET EXPLORER
HOW TO CONFIGURE MOZILLA FIREFOX
STEP 1:OPEN THE MOZILLA THROUGH THE ICON ON YOUR DESKTOP, WHEN IT OPENS, CLICK ON TOOLS, THEN OPTIONS, THEN A POP UP MENU JUMPS OUT, LOCATE NETWORK, THEN CLICK ON IT ALSO AND THE SETTINGS INTERFACE WILL OPEN, YOU WILL BE PROVIDED WITH THREE BOX, IN WHICH YOU ARE TO CHOOSE THE LAST ONE / MARGINAL CONFIGURATION = YOU WILL NEED TO PROVIDE THE IP IN THE tTTP PROXY AND PORT IN THE PORT BOX, THEN TICK THE USE THIS PROXY FOR ALL PORT. THEN CLICK ON OK AND START BROWSING.
TO CONNECT OPERA
OPEN THE OPERA FROM YOUR DESKTOP, AFTER OPENING, CLICK ON TOOLS, THE PREFERENCES, AFTER CLICKING ON THAT A BOX WILL SHOW UP, LOCATE ADVANCED AND CLICK, AFTER THAT LOCATE AND CLICK ON NETWORK, THEN PROXY SERVER. THEN TICK THE HTTP AND HTTPS BOX PROVIDED AND IMPUT YOUR DESIRED IP AND PORT FOR THE AVAILABLE CHEAT GIVEN TO YOU THEN CLICK ON OK AND BROWSE.
HOW TO CONNECT INTERNET EXPLORER
OPEN THE INTERNET EXPLORER ON YOUR DESKTOP, WHWEN IT OPENS LOCATE ON TOOLS, OPEN, AND CLICK ON INTERNET OPTIONS, ANOTHER BOX WILL THEN OPEN, LOCATE CONNECTIONS AND CLICK ON SETTINGS THEN. LEAVE EVERYTHING THE WAY YOU SEE THEM, JUST GO TO TICK THE OPTIONS OF USE A PROXY CONNECTION, THEN IN THE ADDRESS BOX, IMPUT THE IP AND IN THE PORT IMPUT THE PORT, THEN TICK THE BYPASS PROXY SERVER FOR LOCAL ADDRESS. THEN CLICK OK. ND YOU ARE GOOD TO GO.
STEP 1:OPEN THE MOZILLA THROUGH THE ICON ON YOUR DESKTOP, WHEN IT OPENS, CLICK ON TOOLS, THEN OPTIONS, THEN A POP UP MENU JUMPS OUT, LOCATE NETWORK, THEN CLICK ON IT ALSO AND THE SETTINGS INTERFACE WILL OPEN, YOU WILL BE PROVIDED WITH THREE BOX, IN WHICH YOU ARE TO CHOOSE THE LAST ONE / MARGINAL CONFIGURATION = YOU WILL NEED TO PROVIDE THE IP IN THE tTTP PROXY AND PORT IN THE PORT BOX, THEN TICK THE USE THIS PROXY FOR ALL PORT. THEN CLICK ON OK AND START BROWSING.
TO CONNECT OPERA
OPEN THE OPERA FROM YOUR DESKTOP, AFTER OPENING, CLICK ON TOOLS, THE PREFERENCES, AFTER CLICKING ON THAT A BOX WILL SHOW UP, LOCATE ADVANCED AND CLICK, AFTER THAT LOCATE AND CLICK ON NETWORK, THEN PROXY SERVER. THEN TICK THE HTTP AND HTTPS BOX PROVIDED AND IMPUT YOUR DESIRED IP AND PORT FOR THE AVAILABLE CHEAT GIVEN TO YOU THEN CLICK ON OK AND BROWSE.
HOW TO CONNECT INTERNET EXPLORER
OPEN THE INTERNET EXPLORER ON YOUR DESKTOP, WHWEN IT OPENS LOCATE ON TOOLS, OPEN, AND CLICK ON INTERNET OPTIONS, ANOTHER BOX WILL THEN OPEN, LOCATE CONNECTIONS AND CLICK ON SETTINGS THEN. LEAVE EVERYTHING THE WAY YOU SEE THEM, JUST GO TO TICK THE OPTIONS OF USE A PROXY CONNECTION, THEN IN THE ADDRESS BOX, IMPUT THE IP AND IN THE PORT IMPUT THE PORT, THEN TICK THE BYPASS PROXY SERVER FOR LOCAL ADDRESS. THEN CLICK OK. ND YOU ARE GOOD TO GO.
Saturday, September 11, 2010
ZAIN BROWSING WITH PC FOR AT LEAST
Choose A Browsing Plan
Zain has different browsing
packages, 50 MB,1000 MB. E. t. c,
so what is left is for you to buy
one of the MB Package. Let me
use the 50 MB for instance. To
acquire the 50 MB package, you
will need to load a Zain credit of
#500 ( Five Hundred Naira Only).
Loading is done using the *126
*PIN NUMBER# To convert the
loaded #500 to 50 MB, you will
need to type in this code *141
*712 *3 # and send (if you are
using your phone as modem), or
type in the code into the USSD of
your Zain internet modem
platform and also click on send
(if you use the Zain modem). If
you just load your Zain credit
without converting it to a
browsable package e. g. 50 MB,
you will still browse but your
money will disappear in less than
15 minutes!
Load your #500 Zain credit as
explained above and convert to
the 50 MB browsable format
using the code giving above
(*141 *712 *3 #). When you
check your browsable balance,
(using *141 *712 *0 #), a
message like this will show up:
“ You have used 0MB of your
current 50MB bundle. Your
bundle expires on-- ---- date” For
example if you load your 50 MB
bundle today (8 th of June,
2010) , your data package will
expire by midnight of the
following day,i. e 12 midnight of
7 th of July which is also 8 th of
July,2010.
Now let me tell you about the
loophole that works very very
effectively, so you will NEVER
load another card again.
1. Take note of the date/day of
loading your credit and
activating your browsing
bundle.
2. Make sure you do not finish
the whole 50 MB bundle prior to
the expiration period. For
example assuming today is 6 th
July, 2010 ; make sure you did
not completely finish the whole
50 MB between the 6 th of July
and midnight of the other day. I
personally advice that you do
not use more than 40 MB out of
the 50 MB so that you may still
have an extra 10 MB
3. By around 11. 30 p. m the
following day, that is about 30
minutes before the expiration
period of your active 50 MB
internet bundle, connect your
internet with the remaining 10
MB and make sure you’re online
till after 12. 00 midnight i. e
around 12. 15 a. m.
4. Normally, if you ’re not online,
as explained above, your data
bundle will just expire and you
will need to load again to
browse. But whenever you ’re
online as explained above, the
Zain system will automatically
reverse your internet bundle
from what you have left, and
credit your account again with
another 50 MB.
If you check your browsable
bundle after the 12 midnight as
explained above, it would have
reversed to this: “You have used
0MB of your current 50MB
bundle. Your bundle expires on
2010 /07 /08 ( since the date
now is 7 th July, 2010 ” (Another
24 hours has been added) This
means, you will have to keep
repeating this same process
again and again bearing in mind
the new date and how to
effectively use it for profit.
NOTE
Some few minutes after the 12.
00 midnight, if you check your
data bundle balance using *141
*712 *0 #, you may get a
message like this: “Your data
bundle is not active” Do not
bother about this. Just keep
browsing as the internet
network will still be going. If you
check your balance again by 12.
15 a. m or later, your data bundle
would have been reversed and
you can do a lot of things on the
internet with that.
You can also use this for the
1000 MB and keep browsing for
free all day long, I know of
someone who have been using
this system for 8 months,
without paying a dime. Send me
your testimonies when it start
working.
Zain has different browsing
packages, 50 MB,1000 MB. E. t. c,
so what is left is for you to buy
one of the MB Package. Let me
use the 50 MB for instance. To
acquire the 50 MB package, you
will need to load a Zain credit of
#500 ( Five Hundred Naira Only).
Loading is done using the *126
*PIN NUMBER# To convert the
loaded #500 to 50 MB, you will
need to type in this code *141
*712 *3 # and send (if you are
using your phone as modem), or
type in the code into the USSD of
your Zain internet modem
platform and also click on send
(if you use the Zain modem). If
you just load your Zain credit
without converting it to a
browsable package e. g. 50 MB,
you will still browse but your
money will disappear in less than
15 minutes!
Load your #500 Zain credit as
explained above and convert to
the 50 MB browsable format
using the code giving above
(*141 *712 *3 #). When you
check your browsable balance,
(using *141 *712 *0 #), a
message like this will show up:
“ You have used 0MB of your
current 50MB bundle. Your
bundle expires on-- ---- date” For
example if you load your 50 MB
bundle today (8 th of June,
2010) , your data package will
expire by midnight of the
following day,i. e 12 midnight of
7 th of July which is also 8 th of
July,2010.
Now let me tell you about the
loophole that works very very
effectively, so you will NEVER
load another card again.
1. Take note of the date/day of
loading your credit and
activating your browsing
bundle.
2. Make sure you do not finish
the whole 50 MB bundle prior to
the expiration period. For
example assuming today is 6 th
July, 2010 ; make sure you did
not completely finish the whole
50 MB between the 6 th of July
and midnight of the other day. I
personally advice that you do
not use more than 40 MB out of
the 50 MB so that you may still
have an extra 10 MB
3. By around 11. 30 p. m the
following day, that is about 30
minutes before the expiration
period of your active 50 MB
internet bundle, connect your
internet with the remaining 10
MB and make sure you’re online
till after 12. 00 midnight i. e
around 12. 15 a. m.
4. Normally, if you ’re not online,
as explained above, your data
bundle will just expire and you
will need to load again to
browse. But whenever you ’re
online as explained above, the
Zain system will automatically
reverse your internet bundle
from what you have left, and
credit your account again with
another 50 MB.
If you check your browsable
bundle after the 12 midnight as
explained above, it would have
reversed to this: “You have used
0MB of your current 50MB
bundle. Your bundle expires on
2010 /07 /08 ( since the date
now is 7 th July, 2010 ” (Another
24 hours has been added) This
means, you will have to keep
repeating this same process
again and again bearing in mind
the new date and how to
effectively use it for profit.
NOTE
Some few minutes after the 12.
00 midnight, if you check your
data bundle balance using *141
*712 *0 #, you may get a
message like this: “Your data
bundle is not active” Do not
bother about this. Just keep
browsing as the internet
network will still be going. If you
check your balance again by 12.
15 a. m or later, your data bundle
would have been reversed and
you can do a lot of things on the
internet with that.
You can also use this for the
1000 MB and keep browsing for
free all day long, I know of
someone who have been using
this system for 8 months,
without paying a dime. Send me
your testimonies when it start
working.
GPASS/SKYPE IS HOT AGAIN WITH MTN
Just connect ur phone wit ur laptop/PC as usual.
Then goto SKYPE, click on connection; at the connection Port, put : 8080.
Then tick HTTP.
At d server, put :010.199.212.002
Port:8080
dats all 4 skype.Then goto ur GPASS, click on OPTION, then select TUNNELING. Tick on connection thru skype.Click OK & wait 4 it to connect. Thats all.
Browse thru d browsers under d APPLICATION....
Enjoy..
Then goto SKYPE, click on connection; at the connection Port, put : 8080.
Then tick HTTP.
At d server, put :010.199.212.002
Port:8080
dats all 4 skype.Then goto ur GPASS, click on OPTION, then select TUNNELING. Tick on connection thru skype.Click OK & wait 4 it to connect. Thats all.
Browse thru d browsers under d APPLICATION....
Enjoy..
LEARN HOW TO EDIT OR CUSTOMISE YOUR OPERA MINI
The following are
needed to customize
Operamini 4.x:
OperaMini 4.x to be modifed
HxD hex editor
WinRAR for extracting a.class,
f.class and v file
Computer
pngout.exe program
Paint
Pixelformer
Splash image in .png format
Calculator
Embedding the Skin on v file:
1. Open v file and the skin file in
HxD hex editor.
2. Highlight all the contents of
the skin file and copy it. You
may press Ctrl+A then Ctrl+C.
Take note of the value in Lenght
indicator. This is the filesize of
skin in hexadecimal.
3. Goto the v file tab and press
Ctrl+F. Search for "png" text
string.
4. Highlight the bytes starting
from 89 50 4E 47 0D 0A 1A or
the address 00001DA0 x 0E
until the Lenght indicator
reaches C7C.
5. Press Ctrl+V to embed the
skin image on v file. Now we're
ready to change those
addresses embedded in the v
file. Change only the addresses
enclosed with the blue boxes.
These addresses are for
unmodded v file and often
times changes if modifications
were already done on the v file.
6. Open the scientific calculator
and put it in hex mode. If the
filesize of the skin in hex is
greater than C7C then subtract
C7C from the filesize of the skin.
If the filesize of the skin is less
than C7C then subtract the
filesize of the skin from C7C.
Take note of the the answer.
Add the answer in procedure 6
to the address enclosed in a box
in procedure 5. Change
them accordingly to the result
of adding or subtracting those
embedded addresses
7. Save v file and exit HxD hex
editor.
8. Open operamini 4.2 with
WinRAR and drag the v file from
the desktop to operamini...jar.
9. Click Ok and close WinRAR.
10. Finally, install your modified
Operamini...jar on your phone
or use microemulator on your
computer to test your work.
Changing the Welcome Page:
1: First, we need a webpage
address. For this guide I will be
using the address "http://
www.mozilla.com/en-US/
firefox/firefox.html" as my
welcome page.
2. Open v file with HxD editor.
Click the Edit menu then click
on Replace. At the Search for
box, type-in "http://
www.operamini.com/
firsttime/4.2/" and at the
Replace with box, type-in the
URL of your welcome screen.
Click OK.
3. Highlight all the text that are
red color and takenote of the
Lenght value. In the screenshot
I got a 31 hex.
4. Change the hex value of the
character just before "http" to
the of length in procedure 3.
5. Now where done with
editing the URL of the welcome
screen. The next thing to do is
to change the embedded
addresses on the v file. If the
length value obtained in
procedure 3 is equal to 27 hex,
then proceed to the next
procedure. If the length value
obtained in procedure 3 is
greater than 27 hex, then
subtract 27 hex from the length
and add the answer to each of
the boxed addresses. If the
length value obtained in
procedure 3 is less than 27 hex,
then subtract it from 27 hex
and subtract the answer to each
of the boxed addresses.
6. Save v file and exit HxD.
7. Test your mod.
Changing the Startup Loading Bar and Background Color:
1. Open pixelformer and choose
a color you want for the loading
bar and background. Take note
of its hex value.
2. Open f.class with HxD hex
editor.
3. Find and replace the hex
values AC 16 14 and FF FF FF
with any hex color you want.
AC 16 14 for loading bar and FF
FF FF for the background color.
4. Save f.class and drag it back
to operamini.
5. Test your work on your
phone or emulator.
Changing the Start Page Title:
1. Think of a good title and
count the numbers characters of
the title. Convert that number
in hex. For example the title
"Google Chrome" has "13"
characters and "D" in
hexadecimal number system.
2. Open the v file with HxD hex
editor. Find and replace "Opera
Mini" with the title you have
thought in step 1.
3. Highlight the character before
the title of your start page.
Right click on it and choose fill
selection. Place the hex
obtained in step 1 in the Hex
values box and press OK. Now
where done with the strings of
the title.
4. If the hex count of your title
is greater than A, subtract A
from the hex count. Take note
of the answer and add that
answer to the embedded
addresses that are enclosed in
red box.
If the hex count of your title is
less than A, subtract the hex
count from A and subtract that
answer from the embedded
addresses in red boxes.
If the hex count is equal to A,
proceed to the next step.
5. Save v file and drag it back to
Operamini.
6. Test your work on your
phone or emulator.
Applying this method will
enable you to edit other strings
in v file. With this you can
change the firsttime page,
Installing, Loading, Help title,
About title and etc.
Skinning OperaMini 4.x:
1. Right-click on any of the skin
and save it as s.png on your
desktop. Then, open it on
microsoft paint.
Default Skin
Black Skin
Green Skin
Pink Skin
Red Skin
Sliver Skin
Yellow Skin
Classic Skin
2. In mspaint, change anything
you want except the size of the
image.
3. Save the changes you made
on s.png and close mspaint.
4. Open operamini 4.2 with
WinRAR and drag s.png on it.
5. Click Ok and close WinRAR.
6. Finally, install your modified
Operamini...jar on your phone
or use
microemulator on your
computer to test your work.
Editing the startup splash screen without the 722 bytes limit:
1. Open v file and the splash
image in HxD hex editor. I used
splash.png as an example
in this tutorial.
2. Highlight all the contents of
splash.png and copy it. You
may press Ctrl+A then Ctrl+C.
Take note of the value in Lenght
indicator. This is the filesize of
splash.png in
hexadecimal.
3. Goto the v file tab and press
Ctrl+F. Search for "png" text
string. After that press F3.
4. Highlight the bytes starting
from 89 50 4E 47 0D 0A 1A or
the address 00002A20 x 0A
until the Lenght indicator
reaches 2D2.
5. Press Ctrl+V to change the
default splash. Now where done
with splash image embedded in
the v file. The next thing to be
done is to change the addresses
embedded in the v file.
Those enclosed in a yellow box
in procedure 1.
6. Open the scientific calculator
and put it in hex mode.
Subtract 2D2 from the Lenght
value obtained in procedure 2.
Takenote of the answer.
Editing the splash screen with limit:
1. Download pngout.rar and
extract in to the desktop.
2. Open mspaint and create a
new file. Set the size to 98 x 24
pixels. You can make the
size of the image bigger or
smaller as long as it will not
exceed 722 bytes after saving
it.
3. Place anything you want on
the canvas.
4. Click File then Save. At the
File name text box type-in
splash, at the Save in choose
Desktop and at the Save as type
choose 24 Color Bitmap. You
can choose 256 Color Bitmap or
16 Color Bitmap if the filesize is
way far beyond 722 bytes.
5. Click Save and exit mspaint.
6. Open the RUN at the start
menu and type cmd then press
Enter. At the command tool,
type
"cd desktop" and press Enter.
After that type-in "pngout
splash.bmp splash.png" and
press
Enter. Exit the command tool.
Check if the saved file doesnt
exceeds 722 bytes and
continue. If not try reducing the
color bitmap or resize the
image size.
7. Open operamini 4.2 with
WinRAR and drag the v file on
the desktop.
8. Launch HxD hex editor and
open the v and splash.png file.
9. At the splash.png, goto the
end of the file and add type 00
hex until the Offset
indicator at the bottom reaches
2D2. After that, press Ctrl+A
then Ctrl+C to copy it.
10. Goto the v file tab and press
Ctrl+F. Search for "png" text
string. After that press
F3.
11. Highlight the bytes starting
from 89 50 4E 47 0D 0A 1A or
the address 00002A20 x 0A
until the Lenght indicator
reaches 2D2.
12. Press Ctrl+V. Save v file and
exit HxD editor.
13. Open operamini 4.2 with
WinRAR and drag the v file from
the desktop to operamini...jar.
14. Click Ok and close WinRAR.
15. Finally, install your modified
Operamini...jar on your phone
or use
microemulator on your
computer to test your work.
In-depth information on
v file:
needed to customize
Operamini 4.x:
OperaMini 4.x to be modifed
HxD hex editor
WinRAR for extracting a.class,
f.class and v file
Computer
pngout.exe program
Paint
Pixelformer
Splash image in .png format
Calculator
Embedding the Skin on v file:
1. Open v file and the skin file in
HxD hex editor.
2. Highlight all the contents of
the skin file and copy it. You
may press Ctrl+A then Ctrl+C.
Take note of the value in Lenght
indicator. This is the filesize of
skin in hexadecimal.
3. Goto the v file tab and press
Ctrl+F. Search for "png" text
string.
4. Highlight the bytes starting
from 89 50 4E 47 0D 0A 1A or
the address 00001DA0 x 0E
until the Lenght indicator
reaches C7C.
5. Press Ctrl+V to embed the
skin image on v file. Now we're
ready to change those
addresses embedded in the v
file. Change only the addresses
enclosed with the blue boxes.
These addresses are for
unmodded v file and often
times changes if modifications
were already done on the v file.
6. Open the scientific calculator
and put it in hex mode. If the
filesize of the skin in hex is
greater than C7C then subtract
C7C from the filesize of the skin.
If the filesize of the skin is less
than C7C then subtract the
filesize of the skin from C7C.
Take note of the the answer.
Add the answer in procedure 6
to the address enclosed in a box
in procedure 5. Change
them accordingly to the result
of adding or subtracting those
embedded addresses
7. Save v file and exit HxD hex
editor.
8. Open operamini 4.2 with
WinRAR and drag the v file from
the desktop to operamini...jar.
9. Click Ok and close WinRAR.
10. Finally, install your modified
Operamini...jar on your phone
or use microemulator on your
computer to test your work.
Changing the Welcome Page:
1: First, we need a webpage
address. For this guide I will be
using the address "http://
www.mozilla.com/en-US/
firefox/firefox.html" as my
welcome page.
2. Open v file with HxD editor.
Click the Edit menu then click
on Replace. At the Search for
box, type-in "http://
www.operamini.com/
firsttime/4.2/" and at the
Replace with box, type-in the
URL of your welcome screen.
Click OK.
3. Highlight all the text that are
red color and takenote of the
Lenght value. In the screenshot
I got a 31 hex.
4. Change the hex value of the
character just before "http" to
the of length in procedure 3.
5. Now where done with
editing the URL of the welcome
screen. The next thing to do is
to change the embedded
addresses on the v file. If the
length value obtained in
procedure 3 is equal to 27 hex,
then proceed to the next
procedure. If the length value
obtained in procedure 3 is
greater than 27 hex, then
subtract 27 hex from the length
and add the answer to each of
the boxed addresses. If the
length value obtained in
procedure 3 is less than 27 hex,
then subtract it from 27 hex
and subtract the answer to each
of the boxed addresses.
6. Save v file and exit HxD.
7. Test your mod.
Changing the Startup Loading Bar and Background Color:
1. Open pixelformer and choose
a color you want for the loading
bar and background. Take note
of its hex value.
2. Open f.class with HxD hex
editor.
3. Find and replace the hex
values AC 16 14 and FF FF FF
with any hex color you want.
AC 16 14 for loading bar and FF
FF FF for the background color.
4. Save f.class and drag it back
to operamini.
5. Test your work on your
phone or emulator.
Changing the Start Page Title:
1. Think of a good title and
count the numbers characters of
the title. Convert that number
in hex. For example the title
"Google Chrome" has "13"
characters and "D" in
hexadecimal number system.
2. Open the v file with HxD hex
editor. Find and replace "Opera
Mini" with the title you have
thought in step 1.
3. Highlight the character before
the title of your start page.
Right click on it and choose fill
selection. Place the hex
obtained in step 1 in the Hex
values box and press OK. Now
where done with the strings of
the title.
4. If the hex count of your title
is greater than A, subtract A
from the hex count. Take note
of the answer and add that
answer to the embedded
addresses that are enclosed in
red box.
If the hex count of your title is
less than A, subtract the hex
count from A and subtract that
answer from the embedded
addresses in red boxes.
If the hex count is equal to A,
proceed to the next step.
5. Save v file and drag it back to
Operamini.
6. Test your work on your
phone or emulator.
Applying this method will
enable you to edit other strings
in v file. With this you can
change the firsttime page,
Installing, Loading, Help title,
About title and etc.
Skinning OperaMini 4.x:
1. Right-click on any of the skin
and save it as s.png on your
desktop. Then, open it on
microsoft paint.
Default Skin
Black Skin
Green Skin
Pink Skin
Red Skin
Sliver Skin
Yellow Skin
Classic Skin
2. In mspaint, change anything
you want except the size of the
image.
3. Save the changes you made
on s.png and close mspaint.
4. Open operamini 4.2 with
WinRAR and drag s.png on it.
5. Click Ok and close WinRAR.
6. Finally, install your modified
Operamini...jar on your phone
or use
microemulator on your
computer to test your work.
Editing the startup splash screen without the 722 bytes limit:
1. Open v file and the splash
image in HxD hex editor. I used
splash.png as an example
in this tutorial.
2. Highlight all the contents of
splash.png and copy it. You
may press Ctrl+A then Ctrl+C.
Take note of the value in Lenght
indicator. This is the filesize of
splash.png in
hexadecimal.
3. Goto the v file tab and press
Ctrl+F. Search for "png" text
string. After that press F3.
4. Highlight the bytes starting
from 89 50 4E 47 0D 0A 1A or
the address 00002A20 x 0A
until the Lenght indicator
reaches 2D2.
5. Press Ctrl+V to change the
default splash. Now where done
with splash image embedded in
the v file. The next thing to be
done is to change the addresses
embedded in the v file.
Those enclosed in a yellow box
in procedure 1.
6. Open the scientific calculator
and put it in hex mode.
Subtract 2D2 from the Lenght
value obtained in procedure 2.
Takenote of the answer.
Editing the splash screen with limit:
1. Download pngout.rar and
extract in to the desktop.
2. Open mspaint and create a
new file. Set the size to 98 x 24
pixels. You can make the
size of the image bigger or
smaller as long as it will not
exceed 722 bytes after saving
it.
3. Place anything you want on
the canvas.
4. Click File then Save. At the
File name text box type-in
splash, at the Save in choose
Desktop and at the Save as type
choose 24 Color Bitmap. You
can choose 256 Color Bitmap or
16 Color Bitmap if the filesize is
way far beyond 722 bytes.
5. Click Save and exit mspaint.
6. Open the RUN at the start
menu and type cmd then press
Enter. At the command tool,
type
"cd desktop" and press Enter.
After that type-in "pngout
splash.bmp splash.png" and
press
Enter. Exit the command tool.
Check if the saved file doesnt
exceeds 722 bytes and
continue. If not try reducing the
color bitmap or resize the
image size.
7. Open operamini 4.2 with
WinRAR and drag the v file on
the desktop.
8. Launch HxD hex editor and
open the v and splash.png file.
9. At the splash.png, goto the
end of the file and add type 00
hex until the Offset
indicator at the bottom reaches
2D2. After that, press Ctrl+A
then Ctrl+C to copy it.
10. Goto the v file tab and press
Ctrl+F. Search for "png" text
string. After that press
F3.
11. Highlight the bytes starting
from 89 50 4E 47 0D 0A 1A or
the address 00002A20 x 0A
until the Lenght indicator
reaches 2D2.
12. Press Ctrl+V. Save v file and
exit HxD editor.
13. Open operamini 4.2 with
WinRAR and drag the v file from
the desktop to operamini...jar.
14. Click Ok and close WinRAR.
15. Finally, install your modified
Operamini...jar on your phone
or use
microemulator on your
computer to test your work.
In-depth information on
v file:
Subscribe to:
Posts (Atom)